300 Stainless grade

304 BA，304 NO.4 ,304L NO.4

304 2B, 304L 2B , 316L 2B,316 2B

304（Hard situation）1/2H，3/4H，H
304 HL, 304L HL

400 Stainless grade

430 BA，430 1D， 430 NO.4

430 2D（Hard）：1/2H（250°-280°），3/4H（290°-330°），H（400°-450°）

Stainless Width：1000mm—1500mm

Stainless Thickness：0.3mm—3.0mm

 

Mechanical properties of austenitic stainless steel

Stainless production specification

Grade	Surface	Thickness	Width
201	2D	0.1-0.5mm	10-640mm
301	2D/DF(1/2H、3/4H、H、EH、SEH)	0.05-1.0mm	10-1240mm
304	BA/2BB HL	0.1-1.0mm	10-1240mm
	2D/DF(1/2H、3/4H、H)	0.05-1.0mm	10-1240mm
316L/321	2BB	0.05-1.0mm	10-1240mm
316L/321	2D/DF(1/2H、3/4H、H)	0.05-1.0mm	10-1240mm
430	BA/2BB	0.1-1.5mm	10-1240mm
	BA1	0.2-0.5mm	10-720mm
	1D/2BD	0.1-1.5mm	10-1240mm
409/410S	1D/BA	0.1-1.5mm	10-1240mm
444	2D/DF(1/2H、H)	0.05-1.0mm	10-1240mm

 

Stainless steel sheets / coil /colour sheet .
Material: SS304, 201, 316, 316L,430,410,429

Raw surface : 2B/BA/NO.4/HL

Size (mm): 1000*2000, 1219*2438, 1219* 3048, or customize size

Thickness: 0.3-3 mm, 0.15-10mm sheet plate etc.

Surface: Mirror Surface, Hairline Surface, Sand Blast Surface, Vibration Surface, Etched Surface, Embossed Surface, 3D Surface

Parts of stainless grade property from our factory

SUS304 Stainless material

Surface	Tensile Mpa	Yield Mpa	Elongation%	Elongation% Actual	Hardness（Hv)	Actual factory hardness Hv(range 20）
2B			≥40	50–60	150-180	160-180
1/4H	≥620	≥400	≥15	35–50	210-240	215-235
1/2H	≥780	≥470	≥6	25–40	250-280	255-275
3/4H	≥930	≥665	≥3	20–30	310-340	315-335
H	≥1130	≥880	≥1	2–10	370-400	375-395

 SUS301 Stainless material

Surface	Tensile Mpa	Yield Mpa	Elongation%	Elongation% Actual	Hardness（Hv)	Actual factory hardness Hv(range 20）
soft	≥580	≥205	≥40	40–55	190-220	195-215
1/4H	≥770	≥450	≥20	25–40	250-280	260-280
1/2H	≥930	≥510	≥10	15–30	310-340	320-340
3/4H	≥1130	≥754	≥5	10–20	370-400	380-400
H	≥1320	≥1030	—	5–15	430-460	430-450
EH1	≥1570	≥1275	—	0–1	490-520	500-520
EH2	≥1740	≥1450	—	0–1	530-560	540-560
SEH	≥2000	≥1850	—	0–1	≥580	≥590

 

SUS201LH Stainless material

Surface	Tensile Mpa	Yield Mpa	Elongation%	Elongation% Actual	Hardness（Hv)	Actual factory hardness Hv(range 20）
soft	≥600	≥400	35–40	35–40	210-250	According to po
1/2H	≥850	≥470	15–35	15–35	250-280	According to po
3/4H	≥950	≥600	20–30	20–30	310-340	According to po
H	≥1080	≥750	5–20	5–20	370-400	According to po

 

SUS316Lstainless material

Surface	Tensile Mpa	Yield Mpa	Elongation%	Elongation% Actual	Hardness（Hv)	Actual factory hardness Hv(range 20）
软态			≥40	50–60	140-170	145-165
1/4H	≥550	≥330	≥15	30–50	210-240	215-235
1/2H	≥730	≥430	≥6	20–40	250-280	255-275
3/4H	≥880	≥620	≥3	10–20	310-340	315-335
H	≥1050	≥840	≥1	2–10	360-390	365-385

For the above mechanical property parameters, 301 and 304 hard materials are in accordance with JISG4313-2011 standard, and soft materials are in accordance with JIS4305-2012 standard.